Project Photos


Pic. 1: Four open sections with an inch of plastic for support.	Pic. 2: Zip ties to hold the hardware cloth

Pic. 3: Hole for zip tie	Pic.4: Close nipple with lock nut on either side

Pic. 5: Plastic to stop door	Pic. 6: Close up of door stop

Pic. 7: Hinge attaching door to barrel	Pic. 8: the 3 foot 2x4's with 8inch 2x4 in middle, and 5inch bolt through all three pieces

Pic 9: Floor gange attached to wood frame	Pic. 10: attached floor gange

Pic. 11: Metal tube through barrel and screwed into floor gange	Pic. 12: Handles for spinning the barrel; I attached three handles

Pic. 13: Handle for the door.